4.25 x 11
Exterior Addendum Blank. Strong Adhesive. Extra Fade Resistant
Blank exterior addendum stickers with permanent adhesive for open lots. 4.25x11, laser-compatible, outdoor-grade. Wholesale from AK Dealer Services, TX.
Heavy white stock
Laser compatible
Strong Adhesive
Extra Fade resistant
1-part, self-adhesive, 4 sides
4.25 x 11
Wholesale Addendum Supply for Open-Lot Operations
1,000 unit minimum — Permanent Adhesive, ready to print
Stock a case of blank exterior addendum forms with permanent adhesive and print what you need as vehicles arrive. Permanent 4-sided adhesive ensures forms stay put through months of outdoor display without mid-season replacement due to peeling or edge lifting. No reorder delays, no pre-printed content that goes obsolete when your form changes. AK Dealer Services ships from Mansfield, TX—fast turnaround, no minimums per design since it's blank stock.
Why Dealers Stock Our Exterior Addendum Blank — Permanent Adhesive
The exterior addendum blank with permanent adhesive is the most flexible compliance form for dealers operating open lots or requiring extended outdoor display. Control your form content—print exactly what each vehicle needs—while permanent 4-sided adhesive ensures stickers survive rain, UV exposure, freeze-thaw cycles, and wind without peeling or edge lifting. No sticker replacement mid-season due to adhesive failure.
Fully Blank with Permanent Adhesive Control
No pre-printed header, no fixed fields, no layout constraints. The entire face is yours to customize per vehicle. Use your own template, your own font, your own form design. Print one at a time or batch-process your entire inventory in one run. Permanent 4-sided adhesive holds through outdoor exposure and extended vehicle display without edge lifting or bubbling caused by weather exposure.
Exterior-Grade Permanent Adhesive, All Four Sides
Applied to the outside of the window, this form uses permanent 4-sided adhesive rated for open-lot durability. The perimeter peel border bonds directly to the exterior glass surface and holds through rain, car washes, temperature changes, and seasonal weather cycles typical on an outdoor lot. No mid-season replacement due to adhesive failure.
Fade-Resistant Heavy White Stock
The paper stock is formulated to resist UV fading even on vehicles sitting in direct sun for weeks or months. Print stays readable for the full duration your unit is on the lot—no yellowing, no ink bleed, no color shift from heat exposure. Permanent adhesive combined with fade-resistant stock ensures both form content and adhesive durability through extended outdoor display.
Laser Printer Compatible
Runs clean through standard office laser printers with no special settings. The coating prevents toner smearing and produces crisp, professional output every time. Works with all major printer brands. Permanent adhesive does not interfere with printability or laser performance.
Wholesale Pricing at Volume
The blank format is ideal for dealers who run high volume and need flexible form inventory. Order 1,000 units and print to-spec as vehicles come in. Volume breaks at 2,500 and 5,000 units reduce your per-sticker cost significantly. Permanent adhesive versions maintain the same wholesale pricing structure as standard blanks.
Easy Clean Removal
When a vehicle sells or your form needs updating, removal is straightforward. The permanent adhesive releases cleanly from exterior glass without leaving residue. No scraping, no solvent needed. Quick removal keeps your lot moving while permanent adhesive ensures stickers stay put until you're ready to remove them.
Exterior Addendum Blank — Permanent Adhesive | Dealer FAQ
Q. What's the difference between standard blank addendum and permanent adhesive version?
Both are fully blank, laser-compatible forms sized 4.25 x 11 inches. The permanent adhesive version applies 4-sided bonding rated for open lots with extended vehicle dwell times (30+ days) or harsh weather exposure. Standard blanks carry mid-strength adhesive. Choose permanent adhesive if your lot is exposed to the elements and vehicles sit 4+ weeks; choose standard if vehicles move quickly or are stored under cover.
Q. Can I print these on my dealership's laser printer?
Yes. Standard dealership laser printers work fine at 600 DPI or higher. No special drivers, coatings, or equipment required. Heavy white stock holds toner without feathering or bleeding. Test a small sample first to confirm your toner temperature settings, but most modern HP, Xerox, and Canon equipment operates without modification. Permanent adhesive does not affect printability.
Q. How long do these hold together on outdoor glass with permanent adhesive?
Permanent 4-sided adhesive supports 12+ months of outdoor display in direct sun, rain, and seasonal freeze-thaw cycles. Fade-resistant heavy white stock keeps printed content readable through months of outdoor exposure. Edges remain sealed; no water intrusion, no bubbling, no mid-season lifting. Permanent adhesive eliminates the edge-lifting and peeling that affects standard adhesive versions during extended lot dwell.
Q. Why would I choose permanent adhesive for blank addendum forms?
Choose permanent adhesive if vehicles sit on your lot for 30+ days, if you operate in a high-wind environment, or if your lot experiences frequent rain or temperature swings. Permanent adhesive prevents mid-season peeling and replacement, eliminating labor cost of reapplication. For high-turnover lots where vehicles leave within 7–10 days, standard adhesive may be sufficient. Evaluate your average dwell time and climate.
Q. Can this blank addendum form be used on vehicles stored outdoors?
Yes—permanent adhesive version is specifically designed for exterior application on outdoor inventory. The adhesive is formulated for exterior glass and permanent bond strength holds through typical lot conditions including rain, temperature swings, and car wash cycles. For extended outdoor exposure (60+ days), check the form periodically; permanent adhesive prevents the edge lifting and peeling common with standard versions.
Q. How do I design my addendum layout for the blank form?
Any word processor or PDF tool works. Create a document sized 4.25 x 11 inches, set your margins to leave at least 0.25 inches from each edge (the adhesive border area), and design your form. Save as PDF or print directly. Most dealers use a simple table layout with fields for vehicle description, price, dealer add-ons, and any required disclosures. Run a test print on plain paper first to check alignment before printing on your sticker stock. Permanent adhesive does not affect printing.
Q. Is the blank addendum compliant with FTC regulations?
The blank addendum is a supplemental disclosure form — it is not a Buyers Guide and does not fulfill the FTC Used Car Rule (16 CFR Part 455) requirement. That rule requires a specific Buyers Guide form on every used vehicle. The addendum supplements the Buyers Guide with additional dealer disclosures. You need both. See our Exterior Buyers Guide AS IS for the federally required form. Permanent adhesive does not affect compliance status.
Q. How does permanent adhesive hold up through an automated car wash?
The permanent 4-sided adhesive creates a strong, water-resistant bond around the entire form. In standard touchless or soft-touch automated car washes, the sticker holds without lifting or water intrusion. For high-pressure hand washing directly at the sticker, permanent adhesive remains superior to standard versions—you may see minimal edge movement over repeated cycles, but permanent adhesive eliminates the bubbling and peeling failures common with standard adhesive. For the best seal, apply to clean dry glass and press all four edges firmly before returning the vehicle to the lot.
Exterior Addendum Blank — Permanent Adhesive for Open Lots
The exterior addendum blank with permanent adhesive is the most flexible compliance form for dealers operating open lots or storing vehicles outdoors for extended periods. This 4.25 x 11" sticker has no pre-printed content—the entire face is open for your laser printer. Print your own form design, your own field layout, and your own disclosure language on demand, one vehicle at a time or in batch runs. Permanent 4-sided adhesive survives rain, UV exposure, seasonal temperature swings, and wind without peeling or edge lifting, eliminating the mid-season replacement labor that standard adhesive requires. For comparison, our standard exterior addendum blank offers the same printing flexibility with different adhesive strength profiles suited to faster lot turnover.
Product Specifications
Permanent adhesive version of our 4.25 x 11" exterior addendum blank fits cleanly in the window alongside a Buyers Guide or Monroney sticker. Heavy white paper with fade-resistant coating and laser-compatible surface. Permanent 4-sided adhesive peel-off border covers all four sides for a full-perimeter exterior seal.
| Spec | Detail |
|---|---|
| Size | 4.25 x 11 inches |
| Application | Exterior glass surface |
| Adhesive | Permanent, 4-sided peel border |
| Stock | Heavy white, fade-resistant, laser-compatible |
| Print compatibility | Laser printer, 600 DPI and higher |
| Pre-printed content | None (fully blank) |
| Minimum order | 1,000 units |
| SKU | 1001913-PA |
| Turnaround | 5–7 business days from Mansfield, TX |
When to Use Permanent Adhesive Blank vs. Standard
The permanent adhesive version is the right choice for open-lot dealers:
You operate an open lot with extended vehicle dwell times. If vehicles sit 30+ days outdoors, permanent adhesive eliminates edge lifting and peeling caused by rain exposure, freeze-thaw cycles, and temperature swings. Standard adhesive versions fail mid-season; permanent adhesive keeps forms intact through the entire lot period.
You store inventory in harsh climates. Dealers in Texas panhandle, Midwest, Northeast, mountain regions, and coastal areas face adhesive failure with standard versions. Permanent adhesive is engineered for these environments and eliminates replacement labor.
You want to minimize mid-season sticker replacement and labor. Calculate your current replacement rate: if you’re reapplying addendum forms to 10% or more of vehicles due to peeling or lifting, permanent adhesive eliminates that labor cost.
You have multiple form templates that change seasonally. Blank stickers with permanent adhesive let you update your template without placing a new custom print order. Just redesign your document and reprint—permanent adhesive stays reliable regardless of content changes.
If your form layout is stable, you want a polished branded appearance, and vehicles move quickly off the lot, the standard exterior addendum blank or Exterior Addendum Custom — Permanent Adhesive may be better options.
Why Permanent Adhesive on All Four Sides
Permanent 4-sided adhesive addresses the specific failure modes that standard adhesive systems experience on open-lot addendum forms:
Open-Lot Environmental Durability Addendum forms applied to outdoor vehicles face rain penetration, freeze-thaw stress, and UV exposure. Rain penetrates edges of forms applied with standard or mid-strength adhesive, causing water intrusion between glass and adhesive layer. This water pocket expands and contracts with temperature swings, lifting edges and creating bubbles that compromise form legibility.
Permanent 4-sided adhesive creates a continuous, integrated perimeter seal that prevents water ingress entirely. No water pocket means no edge lifting, no bubbling, no mid-season reapplication. Forms applied with permanent adhesive remain sealed and legible through weeks or months of outdoor exposure.
Freeze-Thaw Cycle Resistance Dealers across the Midwest, Northeast, and mountain regions experience severe addendum form failures due to freeze-thaw cycles. Forms applied in fall with standard adhesive often show severe edge curl and peeling by winter as seasonal temperature swings stress the adhesive bond and glass interface.
Permanent adhesive bonds across a 4-sided perimeter, distributing thermal stress evenly instead of concentrating it at edges. The adhesive layer remains flexible through temperature swings, preventing the brittle failure and edge curl characteristic of inferior systems.
UV and Weather Exposure Heavy white, fade-resistant stock is designed to resist ink degradation, but weak adhesive systems fail independently of stock quality. Permanent adhesive is formulated with UV-resistant additives maintaining bond strength through 12+ months in direct sun and coastal salt spray environments. Standard adhesive often shows degradation within 6–8 months, forcing form replacement despite perfectly legible printed content.
Cost-Benefit for Compliance Form Programs Consider a dealer running 50 vehicles per month at 45-day average dwell using standard adhesive addendum blanks. Experience suggests 15–25% of forms develop edge peeling or lifting requiring mid-season replacement. Over a 12-month period, this means 90–150 forms reapplied, representing 22–38 hours of lot technician labor. At $20 per hour labor, that’s $440–$760 annual replacement labor.
Permanent adhesive trades approximately $0.10–$0.15 higher per-unit cost than standard (roughly $100–$150 per 1,000-unit order). The annualized labor savings easily exceed this marginal cost, making permanent adhesive the economic choice for dealers with extended dwell cycles.
Peace of Mind During Extended Lot Storage Permanent adhesive means addendum forms stay intact and legible through months of outdoor exposure without technician intervention. No mid-season replacement due to adhesion failure. Your compliance documentation remains visible, professional, and secure throughout the entire vehicle display period. This reliability is especially critical for high-price inventory, CPO programs, or fleets where extended lot display is standard.
How to Apply Exterior Addendum Forms with Permanent Adhesive
Correct application takes about 30 seconds per vehicle and ensures the form stays put through lot conditions:
- Clean the window surface — wipe the exterior glass with a clean dry cloth to remove dust, water spots, and any residue from previous stickers
- Print your form — run the blank sticker through your laser printer with your form template; verify alignment with a plain paper test first
- Peel the border — remove the adhesive backing from all four perimeter edges; the center of the sticker remains flat
- Position carefully — place the form in your target position before pressing—once the permanent adhesive contacts glass it bonds quickly
- Press and seal — press firmly from the center outward toward each edge, making sure all four borders are fully adhered to the glass
- Inspect edges — run your finger along all four edges to confirm full contact, especially the corners
For removal: use the edge of a plastic card or your fingernail to lift a corner, then peel at a low angle. The permanent adhesive releases cleanly from glass without leaving residue, making vehicle refreshes and format updates quick and seamless.
Compliance Notes for Dealers
The exterior addendum blank is a supplemental disclosure form. It is not a substitute for the FTC-required Buyers Guide. Under 16 CFR Part 455, any dealer selling six or more used vehicles per year must display a Buyers Guide—the specific federal form disclosing warranty status—on every used vehicle offered for sale.
The addendum supplements this requirement. Common disclosures placed on the addendum include:
- Dealer-installed accessories and their individual prices (required in many states)
- Prior use disclosure (rental, fleet, lease, prior damage—required in California and other states)
- Lemon law buyback disclosure where applicable
- Dealership warranty terms for limited warranty programs
- Reconditioning or certification details for CPO programs
- Out-the-door price breakdown including fees and applicable taxes
Check your state’s DMV or attorney general guidelines for any state-specific addendum requirements beyond the federal baseline. Permanent adhesive does not affect compliance status; it is a durability enhancement only.
Stocking Strategy for Open-Lot Operations
For a lot moving 30–50 units per month in an open-lot environment, a case of 1,000 blank exterior addendum forms with permanent adhesive typically covers 3–4 months of inventory. Ordering in larger quantities (2,500+ units) reduces your per-unit cost and eliminates the risk of running out during a busy sales period.
Because the blank format has no custom printing, reorders ship faster than custom products—no proof cycle, no design review. You can place a reorder and receive stock within 5–7 business days from our Mansfield, TX facility.
Permanent adhesive adds reliability to your stocking strategy by reducing emergency reorders due to adhesive failure. More consistent per-unit usage means more predictable inventory cycling and less waste.
About AK Dealer Services
AK Dealer Services is a U.S.-based dealer compliance supply company. Window stickers, Buyers Guides, and addendum forms are our core product line. We supply independent dealers, franchise groups, and auction operators. Our Mansfield, Texas facility specializes in permanent adhesive formulations engineered for open-lot durability and extended vehicle display periods.
If you have questions about which addendum format or adhesive option is right for your lot, contact us through the Wholesale Inquiry form and we’ll help you find the right product and quantity for your volume and lot conditions.
SKU 1001913-PA | Heavy White, Fade-Resistant, Permanent 4-Sided Adhesive | 4.25 x 11" Minimum Order: 1,000 units | Turnaround: 5–7 business days | Location: Mansfield, TX